Toshiba Strata DK 280 Installation Manual page 463

Program 28 -
DSS Console/Attendant Telephone Assignments
~~~li;l~~[rm~-Spkrl2/~~lI-ISpkrlr~r~~-JSpkrJ~~~I-/gpkr/~~~noldJ
SELECT = (1 - 8). Enter the DSS T-L
DSSATT=(i -8)
console number. See Note 1. Enter the attendant digital or electronic
telephone number.
DDSS PDKWHDSS PEKU PCBs
(Lowest Slot to Highest)
Low Slot Number:
Slot Number:
Slot Number:
Slot Number:
Slot Number:
Slot Number:
Slot Number:
DDSWHDSS Attendant DigitaVElectronicTelephone Number
1 U,2,3,4,5,6,7,8)
"cm;:
1
5
I
6
I
7
I
High Slot Number: 8
Notes:
1. Digital DSS consoles (DDSS console) should be assigned to digital telephones,
and electronic DSS consoles (HDSS console) should be assigned to electronic
telephones.
2. RCTUA can support 3 DSS consoles; RCTUB, RCTUBA/BB, 4 DSS consoles;
and RCTUC/D, 8 DSS consoles.
Genera/ Notes:
DK012
8
l
For more information, see the instructions preceding the record sheets.
l
Refer to Program 03, Flexible PCB Slot Assignments, for the PCB slots of
PEKUs and PDKUs configured to support consoles.
l
The system automatically assigns the console supported by the PEKU or PDKU
in the lowest-number PCB slot to be Console number 1. See Note 2 above.
l
The system automatically assigns the telephone connected to the first station
port on a console PDKU or PEKU to be attendant number 1. See Note 2 above,
l
If more than one console is associated with one attendant telephone, then
specify the same number attendant telephone for all consoles associated with it.
l
Initialized data assigns Console #7 to Attendant Telephone #I; Console #2 to
Attendant Telephone #2; Console #3 to Attendant Telephone #3 and Console #4
to Attendant Telephone #4, etc.
January 1996 1
n-47