Toshiba Strata DK 280 Installation Manual page 742

c
Executive Override
To Initiate a Busy Override
Signal:
) After reaching a busy
station. press 2
_ or.
press 2 1.
To Initiate a Do Not Disturb
Override Signal:
l After reaching a Do Not
Disturb station, press 2.
Override Calls
Busy Override allows you to send a muted ring tone to a busy station to indicate
that a call is waiting and Do Not Disturb Override lets you send a tone to an idle
or busy station in the Do Not Disturb mode to indicate that a call is coming in.
You can enter an established conversation with Executive Override.
Busy Override
After pressing 2. a tone will be heard at the busy station, indicating that a call is
waiting.
-or-
For Off-hook Call Announce activation:
W If your station is equipped for manual Off-hook Call Announce, pressing 2
(with Voice First Signaling) or 2 1 (with Tone Signaling) will make an Off-
hook Call Announce call to that station.
n If your station is equipped with automatic Off-hook Call Announce and the
called station is able to receive OCA, you will not receive a busy tone and
you may converse with the called party after dialing the station number.
Do Not Disturb Override
After pressing 2, a tone signal will be heard at the Do Not Disturb station,
indicating that a call is coming in.
Your station must be enabled in system programming to send a Do Not Disturb
Override signal. Also, a telephone can be enabled in system programming to
block Do Not Disturb Override from all other telephones.
Note:
Privacy Override is blocked by DND. OCA, however, is possible to DND
stations from stations that are allowed DND override.
To Initiate Executive
Override:
l After reaching a busy
station, press 3.
To Make All CO Liner on
Your Station Private:
l Press PRIV.
To Cancel Privacy:
l Press PRIV again.
After pressing 3. you will enter the conversation. An optional tone signal may be
heard by the called parties prior to your entering the conversation.
Your station must be enabled in system programming for Executive Override.
Also, a telephone can be enabled in system programming to block Executive
Override from all other telephones.
Privacy On-Line
This option blocks a user et a station programmed with Privacy Override from
entering a CO line conversation by pressing a common CO button. Your station
must be assigned with the PRIV button in system programming to activate this
feature. The button does not block Busy Override or Executive Override. Busy
and Executive Override are described earlier in this guide.
The LED will light steady red and station users will not be able to enter CO line
calls on your station by using Pwacy Override.
The LED will turn off and station users will now be able to enter CO line calls on
your station by using Privacy Override.
60
61