Toshiba Strata DK 280 Installation Manual page 752

c
Delayed Ringing
CO or Centrex line(s) may be programmed for a 12-second and/or 24-second
ring delay at stations to permit alternate answering conditions. Answer the line
when your telephone is ringing.
This section contains access codes for outside CO lines, Paging Group and
Paging Zone Codes, and Call Pickup Codes. It also contains Feature Access
Codes and instructions for programming them onto Speed Dial buttons.
Table 1
CO Line Access Codes
80
With scmw systems, you may only have to dial one of the codes
9 General group code or Least Cost Routing (LCR)'
8 0 1 - 8 1 6 Line Group code?
#7001-f47144 COlineaccesscode2(Use447001-
4 4 7 14 4 if your telephone does not have an
SDS button or when storina on an SD, or as a
Speed Dial code since # indicates the end of a
Speed Dial entry.)
Notes:
1. If you press 9 in a system programmed with LCR. you may or may
not hear internal dial tone, depending on system programming.
2. You can program these longer codes onto an SD button for easy
one-touch access (see Table 4) or request a CD button from your
System Administrator.
::