Toshiba Strata DK 280 Installation Manual page 260

PC Auto Dial Voice Call Test (see Figure 6-39)
There are many off-the-shelf, IBM/MS-DOS
compatible, desktop organizer software packages that
provide an auto dialer function. One of these is the
terminal resident Borland@ SidekickTM. It is used in this
section for test explanation purposes only. If you
choose another auto dialer software package, the
detailed response may be different than that shown
here.
n
RPCI or DIU Programming:
+ Program 20: Port 001. LEDs 01, 02, 05, and
17 ON; all other LEDs OFF.
+ Program 39: Port 001. Data Call (556) and
Data Release (554) buttons are optional. If the
PDIU-DI is only used for the PC auto dial
application, the Data Call and Data Release
buttons are unnecessary.
n
Make sure that the auto dial application software
is installed on the PC root directory and that the
communication parameters of the PC and
application software are set to the same values (in
this test example, Sidekick "SKINSTAL" program).
Note:
If using an RPCI-DI, it may be necessary to
switch the RPCI from the API mode to the
Data Communications Mode before
proceeding with Step 3. To place the RPCI
into the data communications mode from the
PC keyboard: Set hum Lock to ON and type
240
while holding the
Alt
key down (this is
HEX FO). If in the data communication mode
PORTABLE PC 2
MDF
ATCO will switch the RPCI-DI back to the API
mode.
n Make sure that a dialing directory consisting of
names and telephone numbers you wish to auto
dial is installed within the application software
(include the appropriate Strata CO line access
code prefixing each telephone number: #7001 -
#7144,801 - 816, or 9).
E To auto dial using Sidekick from the PC keyboard:
A.
B.
C.
D.
E.
Press the Al.t and
Ctrl
keys simultaneously.
+ The PC screen displays the Sidekick
menu window.
Press F5 twice (Sidekick prompts "search
for INITIALS:" to display on the PC's
screen).
Type the initials or name of the person or
organization you wish to auto dial.
Press Enter.
+ Sidekick finds and highlights the desired
name/number.
Press Enter again.
+ DKT/PDIU-DI 201 seizes the appropriate
CO line and auto dials the selected
telephone number.
+ The LEDs of the DKT's Data Call and CO
line 001 buttons will be lit (if assigned in
Program 39).
+ Dial tone, DTMF tones, and ringback or
busy tones are audible from the DKT's
speaker.
STRATA DK280
DIGITAL '-, :
"(PORT 001)'
CO
I
LINE 1
DIALED LINE
I
MDF
TELEPHONE
Figure 6-39
DK280 PC Auto Dial Voice Call Test
DK0341
I
6-60
January 1996