Toshiba Strata DK 280 Installation Manual page 767

Elapsed Time:
r--z3
LCD Name/Number
Display:
1. Idle Station
[]
-,
2. Called Station
Least Cost Routing (LCR):
While you are making an outgoing CO line call, the call's elapsed time is
displayed. Elapsed time automatically replaces the dialed number on the display
after a programmed period of time. (Timing begins when a CO button is
pressed.)
Notes:
1. On a CO tine ~a//, the display can be alternated between date/time,
elapsed time, and dialed number by pressing PAGE (Soft Keys
must be off before the caN is started).
2. Elapsed time is displayed for 15 seconds after you hang up, and
then changes automatically to date/time.
A name or title can be set in memory for each station. When an LCD station is
idle, the name displays on the top line of the LCD. When a station calls an LCD
station, the name of the calling station displays on the bottom line of the called
station's LCD.
When you are making a call via Least Cost Routing (LCR), your display will
prompt you to dial a number by displaying "DIAL TEL NUMBER".
As you dial the number, it is shown on your display.
14
Message WaitingNoice
Mail:
[,,,,I
Off-hook Call Announce:
j,,,,::;:::j
151
Overrides:
1. Busy Override
When you set Message Waiting at another station. the number of that station is
displayed.
When you hang up after setting Message Waiting at another station. a remmder
is shown on the top row of your display. A"+" indicates there are more messages
in memory. Press SCRL to rotate through more messages.
The display shows the numbers of up to three stations that have left messages
for you. Four numbers may be stored in message memory (see Recalling
Station). The corresponding LCD display example shows: Station 201 has left a
message for station 203. A + indicates there are more messages in memory.
Press SCRL to rotate.
When a Message Waiting voice mail is displayed, a "v" will follow the station
number. A I"+" indicates there are more messages in memory. Press SCRL to
rotate through more numbers. To answer the message, press MSG to call the
station which is displayed.
When you off-hook call announce to a busy station (MMM), your LCD displays
the number of that station.
When another station (MMM) off-hook call announces to your station, your LCD
displays the number of that station.
When you activate the Busy Override feature after calling a busy station, the
station number and the feature are displayed.
15