Toshiba Strata DK 280 Installation Manual page 473

Program 32 -
Automatic Preference (Ports 120 - 239) (continued)
n~iinlr;l~is;l~n~-ISpkrlnnlHola(-lspkr~
SELECT = Station Logical e
_I
I
I
Port Number
Automatic Preference Code: "..'---3tic Preference Code:
Enter the port number of the
DATA = Ringing Code
I Lode ---
tnrer 00 for no selection. Enter 00 for no selection.
station having preference
Enter 0 to disable Ringing Line Preference.3 Enter01 for Primary
UW3
te Pinging Line Preference.3 Enter01 for Primary
UW3
_ -
- r-l- An c I
defined. See Note 1 for
Enter 1 to enable Ringing Line Preference.3
Enter02 for lowest CC finem
west CO line.3
entering a range of ports.
Enter 11 - 26 for line groups 1 - 162.3 for line groups 1 - 16.2.3
Notes:
1. Specify a range of ports by entering:
q c117~000
Lowport -
- High
port
DK0208
_
2. RCTUA and RCTUB provides 8 CO line groups, RCTlJ C/D provides 16 CO line groups.
3. Intercom, lowest [PDN], lowest CO line, or Line Group will be selected only if the telephone is not ringing when it is taken
off-hook (or Spkr is pressed). If a telephone is ringing, Auto Preference of Intercom, [PDN], or outgoing CO line is
canceled. In this case, no selection is made if ringing line Preference is disabled or the ringing lice is selected if ringing line
Preference is enabled.
General Notes:
. For more information, see the instructions preceding the record sheets.
. Initialized data assigns Ringing Code 1 and Automatic Off-hook (Preference) Code 00 for all ports.
January
1996
lo-.57