Announcement Device Block Diagram - Toshiba Strata DK 280 Installation Manual

MDF
rRATA DK280
RSTU
OR
RDSLVRSTS
OR
PSTU
OR
PESU
TO STANDARD TELEPHONE CIRCUIT
TO STANDARD TELEPHONE CIRCUIT
TO STANDARD TELEPHONE CIRCUIT
TO STANDARD TELEPHONE CIRCUIT
TO STANDARD TELEPHONE CIRCUIT
TO STANDARD TELEPHONE CIRCUIT
TO STANDARD TELEPHONE CIRCUIT
TO STANDARD TELEPHONE CIRCUIT
A2"
DIGITAL
ANNOUNCER
A2"'
DIGITAL
ANNOUNCER f
P
SEE PROGRAMS 23 AND 24 FOR DIGITAL ANNOUNCEMENT ASSIGNMENTS
(Al = PRIMARY AUTO ATTENDANT (AA) ANNOUNCEMENTS, A2 = SECONDARY AA ANNOUNCEMENTS)
Figure 6-42
Announcement Device Block Diagram
Program
09-Tells the system where to transfer built-
in Auto Attendant calls after the caller has dialed in
response to the delivered menu options.
Program
60-6-Enter a DISA security code to prevent
users from making unauthorized external calls via the
Auto Attendant DISA access (Dial *) feature.
Program 26-There will be times when transferred
Auto Attendant calls will not be answered after
camping-on to a busy station. This program tells the
system when to end the camp-on and to route the call
to another destination (it could be a secondary
announcement device or alternative stations per
program 10-3, LED 18). If a station has Call Forward
set, the call will forward to the proper destination
instead of routing per AA Program 1 O-3, LED 18.
Program 1 O-3
n LED
18-Some customers may choose to
configure their Auto Attendant without a secondary
n
n
announcement device. In these arrangements:
transferred calls that are unanswered can be
routed for normal ringing to some alternative
stations set in Programs 81, 84, and 87, or back to
the primary announcement device. LED 18 should
be on if the calls should be routed to stations
assigned in Programs 81, 84, and 87. It should be
off for the primary or secondary announcement
device option. If LED 18 is selected, see LEDs 16
and 17 for disconnect timing options.
LED
15-if LED15 is ON (and Music-on-Hold
(MOH) is installed) the DK280 will send MOH to
the caller when the auto attendant routes a call to
ring or camp-on a station; if LED 15 is OFF the
DK280 will send ring-back-tone to the caller.
LEDs 16 and
17-Set LEDs 16 and 17 to tell the
system when to disconnect, as a safeguard, built-
in Auto Attendant calls that have not been
answered by stations. This feature assures that
6-64
January 1996