Toshiba Strata DK 280 Installation Manual page 230

Notes:
1. The call threshold time-the length of time
that a call must be in progress before it is
registered by SMDR-can be set for
either 1.0 or 70 seconds in Program 60-2.
2. MSS will print only on DISA calls that are
answered after the threshold time (set in
Program 60-2). If the call is answered
before the threshold time, the call will
register as a normal incoming call and the
MSS/transfer portion of the call will not
print out.
Figure 6-20 (Release 1 and 2) and 6-21 (Release 3
,
and above) shows a sample SMDR printout and
describes the contents of each column of the printout.
The following examples show several call record
samples and describe the sequence of events which
occurred to generate the call records.
Note:
SMDR printout "time of day" and
day/month/year (DD/MM/YY) is the same as
the system clock time/date set by the station
connected to Port 000. SMDR DD/MMffY will
print out each time 50 call records are
genera ted and at midnight each day.
SMDR Printout Examples
Direct Inward System Access (DISA) CO Lines
Note:
DISA station calls print out as MSS or DISA.
Example l-Ring, No Answer DISA Call
Call Sequence A
Outside caller rings CO line 003. (CO line 003
is programmed as a DISA line.)
Line 003 returns internal dial tone to caller
after one or two ring cycles (five - six
seconds).
Caller does nothing. DH 200 rings but is not
answered.
After 32 seconds, call is disconnected.
Printout A prints after disconnect at 4:59.
Printout A (Release 1 and 2)
003 MSS 04:59 00:00;32 00;06
Printout A (Release 3 and above)
003 MSS 04:59 00:00;25 00;05
Example 2-DISA Internal Station Call
Call Sequence B
n Outside caller rings CO line 003. (CO line 003
is programmed as a DISA line.)
n Line 003 returns intercom dial tone to caller
after two ring cycles (5 - 6 seconds).
n Caller dials 203.
W After 48 seconds from start of call, station 203
answers.
n Printout B prints after station 203 answers the
call at 4:32.
Note:
MSS will not print if the call is answered
before the threshold time set in Program 60-2.
Printout B (Release 1 and 2)
003 MSS 04:32 00:00;48 00;05 203
Printout B (Release 3 and above)
003 MSS 04:32 00:00;48 00;05 203
Example 3-DISA Outgoing CO Line Call
Note:
DISA CO line calls print out as DISA.
Call Sequence C
Outside caller rings CO line 001. (Line 001 is
programmed as DISA.)
Line 001 returns intercom dial tone after two
ring cycles (5 - 6 seconds).
1
Caller dials #7003 to access CO line 003
(outgoing).
Caller dials the DISA security code and
receives CO dial tone.
Caller dials the telephone number and
converses when the call is answered.
Caller hangs up.
The call releases, and Printout C prints after
the call disconnects at 12:22.
Notes:
1. If the CO provides the Calling Party
Control or Auto Release (AR) signal (see
Program 15-O and 15-3), the call
disconnects when either party hangs up.
A 'I*" will follow the CO line number in
Release 1 and 2 and precede the CO line
number in Release 3'on the printout if the
call is disconnected by the CPC or AR
signal.
6-30
January 1996