Toshiba Strata DK 280 Installation Manual page 744

press the
CONFITRNS and dial
a 'transfer-to"
destination. Then press
RLSlANS
-or-
press a DSS button of
a "transfer-to"
destination, then press
RLWANS.
To Make an Outside Call
(On-hook Dialing)
1, Leave the handset on-
hook.
2.
Press any available CO
button.
-0,.
press a [DN], then
enter a CO lme or tine
group access code.
3. Dial a telephone
number.
4. Speak in a normal
voice level toward the
telephone.
5. Press SPKR
to
disconnect the call.
Transfers the original call and answers the new call.
Transfers the original call and answers the new call.
Speakerphone
Digital telephones with speakerphones can make and receive calls without lifting
the handset. Any digital telephone model with an "s" in the model name is
equipped with a speakerphone.
Outside Calls
You can make and receive outside calls without having to lift your handset.
After you press the button, the Line or [DN] LED will flash at the in-use rate and
you will hear dial ton&See Appendix A-Table l-CO Line Access Codes.
You will hear ringback tone (or busy tone, if busy).
To Answer an Incoming Call
Using Speakerphone:
1. When you will hear a
ringing tone. leave the
handset on-hook.
2. Press the CO or [DN]
button next to the
flashing LED.
3. Speak at a normal
voice level toward the
telephone.
4. Press SPKR to
disconnect the call.
To Dial an tnternal Call
(On-hook Dialing) with
Voice First Signaling:
1. Leave the handset
on-hook and press a
WI.
2. Dial the desired station
Directory Number.
The Line LED will flash at the incoming call rate.
After you press the button, the Line or [DN] LED will flash at the in-use rate and
you will be connected to the call.
Internal Calls
You can make and receive internal calls without lifting your handset.
After pressing the button, the LED will flash at the in-use rate and you will hear
internal dial tone.
Notes:
7. M the called station is idle:
n You can leave a Message Waiting indication at the called station
by pressing the Msg button or 7.
n If the system is set for Voice First Signaling, make a voice
announcement when you hear a single tone. (After dialing the
directory number, you can press 1 to change to Tone Signaling.)
n If fhe system is set for Tone Signaling, you will hear repeated
ring tones and you should wait for the call to be answered. (After
dialing the Directory Number, you can dial 1 to change to Voice
First Signa/ing.)
2. If you receive busy tone, you can:
1 Press 4 to set Automatic Call Sack (ACE+
n Pizss Msg or 7 to leave a Message Wating Indication at fhe called
S&tiOn.
w Activate Busy Override if the called station is not equipped for
Off-hook CaM Announce (OCA) by pressing 2.
64
65