Attendant Position Options; Door Phones (Mdfbs; Ac And Reserve Power Hardware; Floor Mount Installation Hardware - Toshiba Strata DK 280 Installation Manual

Toshiba provides the following 2000-series digital
telephones for Strata DK280 systems.
telephone.
Toshiba telephones may be equipped with optional
subassemblies; the function of each subassembly is
given in Table 1-5.

Attendant Position Options

1.6
The DK280 provides three options for attendant
positions which answer system incoming calls.
PC Attendant Console-For medium-to-heavy
traffic systems where an attendant must answer
and transfer incoming calls. The PC attendant
console requires a customer-provided personal
computer plus the RATU PCB (see Table 1-2).
With DK280 Release 2 and
can be connected on systems with RCTUB or
common control PCBs (RCTUA (1 or 3) does not
support attendant consoles). The RATU PCB uses
four station ports in system software.
Direct Station Select (DSS) Console-For medium
traffic systems where an attendant must answer
and transfer incoming calls. See Table 1-1 for
capacities. The DSS console must connect to
circuit on a PDKU PCB (see Table 1-6 for
8
configuration considerations).
Add-On-Module (ADM)-For
smaller systems, where an attendant must answer
and transfer incoming calls. The ADM connects to
any 2000-series digital telephone. The ADM
shares the associated telephones circuit so it does
not require a designated PCB or circuit port (see
Table 1-5).
1996
January
up to two consoles
3,
medium traffic,

Door Phones (MDFBs)

1.7
Up to 12 door phones can be installed in a system
with DK280 Release 1, 2, or
with RCTUA. Each is connected to a DDCB or HDCB
door phone control box. See Table 1-6 for door phone
configuration considerations.
and Reserve Power Hardware
1.8 AC
Detailed information for AC and reserve battery power
installation is described in Chapter 3-Cabinet
Installation. These optional assemblies may be
required.
cables (see Table 1-7).
1-7).
(see Table 1-7).
Floor Mount Installation
1.9
Hardware
Floor mounting DK280 requires RFlF and RCCB
hardware assemblies; wall mounting DK280 does not
require special hardware but may require a plywood
backboard (see Chapter %Cabinet Installation).
brackets (see Table 1-7).
connection box (see Table 1-7).
RCTUB and C/D, nine
3
1-3