Toshiba Strata DK 280 Installation Manual page 582

Program 45-1 -
LCR/Toll Restriction Dial Plan
SELECT = 1 T T___ DATA = Plan 1 - 9
Enter Codes 1 - 9 to indicate
the dial plan for the system.
1 (1 OXXX)+AC+NXWi +NNX
Where:
DK0412
InNXXandNNX,X=O-9, N=2-9.
NXX = Office code (interchangeable; second digit can be 1 or 0).
NNX = Office code {not interchangeable; second digit cannot be 1 or 0).
AC = Area Code
I+ NNX indicates 1 may be dialed before office codes.
1 OXXX = old 5-digit Carrier Access Codes
10 1 YXXx/lO 1 XXXX = new 7-digit Carrier Access Codes
Y=O, 5or6.
IMPORTANT!
The correct Dial Plan must be assigned to allow system LCR and/or
Toll Restriction to function properly.
Notes:
1. 0+ and universal (Codes 5 and 4) are not used in USA.
2.
For UK only.
General Notes:
:
Initialized data assigns Dial Plan 7 to the system with Release 3 and above software; and, Dial Plan 1 with
Release 1 and 2 software.
l
The DK280 will restrict direct dialing of 1 OXXX+ 1 and 1 OXXXXX+ 1 access codes. These codes are allowed in
system speed dial and LCR modified digit tables. This is necessary to control Long-Distance-Carrier access.
1 OXXX+O and 1 OXXXXX+O are allowed/denied depending on the station's class and Progqm 46 (1 O-80)
button/LED 0 1 assignment.
l
For NANP (North American Numbering Plan) upgraded SW version, the dial plan may also be changed from the
station port 000 by entering
INTERCOM
or
DN # 650 6267 X REDIAL,
where X = dial plan number.
1 o-1 68
January 1996