Toshiba Strata DK 280 Installation Manual page 604

Program 51
- LCR Area Codes (Plans 1 m 4)
,
SELECT = LCR A
Plan Number (01 - 04)
I
I DATA = Area Code(s)
(3 digits). See Note 1 for entering a
Action Code:
range of area codes.
Enter 2 to add code to table.
Enter 3 to delete code from table.
Enter 4# to display codes in table.
DATA = Area Code(s)
I
Note:
DK0433
1. To enter a range of Area Codes, press:
Low Azigh A7 TDenotes end of string
Code Code
General Notes:
l
For more information, see the instructions preceding fhe record sheets.
l
initialized data leaves Tables 01 - 15 blank; all codes (000 - 999) are initialized in Table 16. '
. Several ranges or individual codes can be expressed at once by separating them with a # button.
l
011 may be entered as an Area Code into any LCR plan to route direct dial international calls via LCR.
To route
international calls by country code, see Note 5 on Program 52 record sheet.
January 1996