Toshiba Strata DK 280 Installation Manual page 726

c
To Set Call Forward-No
Answer:
1. Press CFNA
-or-
press a [PDN] a
[PhDN] +
#603.
2. Enter the Directory
Number to which calls
will forward.
3. Press SDS.
4. Enter the time at which
the call will forward (08
- 60 seconds).
5. Press CFNA
-or-
press RDL. then press
SPKR.
Call Forward-No Answer
All calls to your station when set with this feature will forward to a selected
station if you fail to answer within a time that you designate.
Note:
Your station can be assigned in system programming to not Call
Forward-No Answer when receiving Voice First (handsfree) or OCA
ca//s. Callers can activate Call Forward-No Answer by dialing 1 during
their voice announcement.
The CFNA LED will flash red.
Press the [PDN] or [PhDN] to be forwarded. You will hear confirmation tone
You will hear confirmation tone if # 6 0 3 was dialed in Step 1
You can omit this step if you pressed CFNA in Step 1 and you do not want to
change the length of time that your telephone will ring before it forwards. Initially,
your telephone will ring 12 seconds before it forwards. Pressing SDS is always
necessary if you pressed [PhDN] + # 6 0 3 in Step 1.
You can omit this step if you do not wish to change the amount of time your
telephone will ring before it forwards. Enter two-digits for seconds (0 8 - 6 0). If
no time is entered, press RDL and the ring time will be the same as the last
setting.
Note:
If no SDS button is programmed on phone, then press * instead.
The Call Frwd No Answer LED will become steady red and calls will forward to
the stored station number.
To Cancel Call Forward-No
Answer:
N Repeat Step 1 and
hang up.
28
To Set Call Forward-
Busy/No Answer:
1.
2.
3.
4.
5.
Press CFWNA
- or -
press a [PDN] or
[PhDN] to be forwarded
+#604.
Enter the Directory
Number to which calls
will forward.
Press SDS.
Enter the time at which
the call will forward
(08 - 60 seconds).
Press CFBINA
- 01.
press RDL, then press
SPKR.
Call Forward--Busy/No Answer
All calls to your station set with this feature will forward immediately to a selected
station whenever you are busy on another call or in the Do Not Disturb mode.
Calls will also forward if you do not answer the call within a time that you
designate.
Note:
Your station can be assigned in system programming not to Call
Forward-No Answer when receiving Voice First (handsfree) ca//s. Callers
can activate Call Forward-No Answer by dialing 1 during the voice
announcement.
The CFB/NA LED will flash red.
You will hear a confirmation tone if # 6 0 4 is dialed
You can omit this step if you pressed CFBINA in Step 1 and you do not want to
change the length of time that your telephone will ring before it forwards. Initially,
your telephone will ring 12 seconds before it forwards. Pressing SDS is always
necessary if you pressed [PhDN] + # 6 0 4 in Step 1.
You can omit this step if you do not wish to change the amount of time your
telephone will ring before it forwards. Enter two-digits for seconds (0 8 - 6 0). If
no time is entered, press RDL and the ring time will be the same as the last
setting. The system is initialized with a 12-second setting.
The CFBINA LED will become steady red and calls will forward to the stored
station number.
29