Toshiba Strata DK 280 Installation Manual page 419

Initialization Program 91-l
- Automatic PCB Recognition/Port Renuinber
L Enter programming mode.
(Do not press the Intercom
or Directory [DN] button.)
Program Telephone Exits Progam Mode
Press button 01 and 02,
LEDs 01 and 02 must be lit.
LCD Displays: 9 1 SELECT = 1
RENUMBER AND RESET
General Notes:
l
Running Program 9 l-9 will run Program 9 I- 1. If 9 l-9 has been completed, it is no longer
necessary to run 91- 1.
IMPORTANT !
If the PCBs are installed in the cabinet after the RCTU PC6 has been initialized with Program 91-9,
run Program 91- 1 after all PCBs are installed. This automatically assigns the PCB slot codes in
Program 03. Program 03 must still be run to identify PCB options such as RRCS codes 92, 93 and
94 and PDKU codes 62 and 64, etc. Program 91-l does NOT erase Program 03 option codes
previously assigned with Program 03.
-
l
Run Program 9 l-1 to bring back logical and physical ports to their (Programs 01 and 02)
initialized settings,
. This program does not change numbers set in Program 04, M4, 05, %-05, @9, or 71, and does
not erase data in other programs.
CAUTION !
Running this program (9 1- 1) will drop all calls. This program INITIALIZES Programs 0 1, 02 but not
Program 04. This program does not erase Program 03 option PCB codes. (Examples: If Slot 00 is
assigned code 92, the code will not be erased when Program 91- 1 is run. Also, if an RCTU PCB
has an RRCS piggyback installed, Program 90- 1 will not change a code from 91 to 92 or 93, etc.
OK00131
January 1996
In 3