Destination Preferred-Msg-Format - Cisco Catalyst 4500 Series Command Reference Manual

destination preferred-msg-format

destination preferred-msg-format
To configure a preferred message format, use the destination preferred-msg-format command.
Syntax Description
long-text
short-text
xml
Defaults
xml
Command Modes
cfg-call-home-profile
Command History Release
12.2(52)SG
Usage Guidelines
To enter profile call-home configuration submode, use the profile command in call-home configuration
mode.
Examples
This example shows how to configure the preferred message format as long text:
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# destination preferred-msg-format long-text
Switch(cfg-call-home-profile)#
Related Commands Command
destination address
destination message-size-limit bytes
destination transport-method
profile
subscribe-to-alert-group all
subscribe-to-alert-group configuration
subscribe-to-alert-group diagnostic
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-190
destination preferred-msg-format {long-text | short-text | xml}
Sends the message in long-text format.
Sends the message in short-text format.
Sends the message in XML format.
Modification
Support was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Configures the destination e-mail address or URL to which
Call Home messages will be sent.
Configures a maximum destination message size for the
destination profile.
Enables the message transport method.
Enters profile call-home configuration submode
Subscribes to all available alert groups.
Subscribes this destination profile to the Configuration
alert group.
Subscribes this destination profile to the Diagnostic alert
group.
OL-25342 -01