Cisco Catalyst 4500 Series Command Reference Manual page 751

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Examples This example shows how to display diagnostic monitoring data for all interfaces with transceivers
installed on the switch:
Switch# show interfaces transceiver
Switch#
Note
This example shows how to display detailed diagnostic monitoring data, including calibrated values,
alarm and warning thresholds, A2D readouts, and alarm and warning flags. The A2D readouts are
reported separately in parentheses only if they differ from the calibrated values:
Switch# show interfaces transceiver detail
OL-25342 -01
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, -
NA or N/A: not applicable, Tx: transmit, Rx: receive.
mA: milliamperes, dBm: decibels (milliwatts).
Temperature Voltage
Port (Celsius) (Volts)
------- ----------- -------
Gi1/1 48.1 3.30
Gi1/2 33.0 3.30
Gi2/1 43.7 5.03
Gi2/2 39.2 5.02
The value for the Optical Tx Power (in dBm) equals ten times log (Tx Power in mW). If the Tx
Power value is 3 mW, then the Optical Tx Power value equals 10 * log (3), which equals 10 *
.477 or 4.77 dBm. The Optical Rx Power value behaves similarly. If the Tx Power or the Rx
Power is zero, then its dBm value is undefined and is shown as N/A (not applicable).
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, + : high warning, -
A2D readouts (if they differ), are reported in parentheses.
The threshold values are calibrated.
Temperature
Port (Celsius)
------- ------------------
Gi1/1 48.1
Gi1/2 34.9
Gi2/1 43.5
Gi2/2 39.1
Voltage
Port (Volts)
------- ---------------
Gi1/1 3.30
Gi1/2 3.30
Gi2/1 5.03
Gi2/2 5.02
Current
Port (milliamperes)
------- -----------------
Gi1/1 0.0
Gi1/2 1.7
Gi2/1 50.6
Gi2/2 25.8
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
: low warning, -- : low alarm.
Optical
Current Tx Power
(mA) (dBm)
-------- --------
0.0 8.1 ++
1.8 -10.0
50.6 + -16.7 --
25.7 0.8
: low warning, -- : low alarm.
High Alarm High Warn
Threshold Threshold
(Celsius) (Celsius)
---------- ---------
100.0 100.0
100.0 100.0
70.0 60.0
70.0 60.0
High Alarm High Warn
Threshold Threshold
(Volts) (Volts)
---------- ---------
6.50 6.50
6.50 6.50
5.50 5.25
5.50 5.25
High Alarm High Warn
Threshold Threshold
(mA) (mA)
---------- ---------
130.0 130.0
130.0 130.0
+ 60.0 40.0
60.0 40.0
show interfaces transceiver
Optical
Rx Power
(dBm)
--------
N/A
-36.9
N/A
N/A
Low Warn Low Alarm
Threshold Threshold
(Celsius) (Celsius)
--------- ---------
0.0 0.0
0.0 0.0
5.0 0.0
5.0 0.0
Low Warn Low Alarm
Threshold Threshold
(Volts) (Volts)
--------- ---------
N/A N/A
N/A N/A
4.75 4.50
4.75 4.50
Low Warn Low Alarm
Threshold Threshold
(mA) (mA)
--------- ---------
N/A N/A
N/A N/A
10.0 5.0
10.0 5.0
2-693