Show Ip Source Binding - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show ip source binding

To display IP source bindings that are configured on the system, use the show ip source binding EXEC
command.
Syntax Description ip-address
mac-address
dhcp-snooping
static
vlan vlan-id
interface interface-name
Defaults
Displays both static and DHCP snooping bindings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(19)EW
Usage Guidelines
The optional parameters filter the display output result.
Examples
This example shows how to display the IP source bindings:
Switch# show ip source binding
MacAddress
------------------
00:00:00:0A:00:0B
Switch#
This example shows how to display the static IP binding entry of IP address 11.0.01:
Switch# show ip source binding 11.0.0.1 0000.000A.000B static vlan 10 interface Fa6/10
show ip source binding 11.0.0.1 0000.000A.000B static vlan 10 interface Fa6/10
MacAddress
------------------
00:00:00:0A:00:0B
Switch#
Related Commands Command
ip source binding
OL-25342 -01
show ip source binding [ip-address] [mac-address] [dhcp-snooping | static] [vlan vlan-id]
[interface interface-name]
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
IpAddress
---------------
11.0.0.1
IpAddress
---------------
11.0.0.1
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
(Optional) Binding IP address.
(Optional) Binding MAC address.
(Optional) DHCP-snooping type binding.
(Optional) Statically configured binding.
(Optional) VLAN number.
(Optional) Binding interface.
Lease(sec) Type
---------- -------------
infinite static
Lease(sec) Type
---------- -------------
infinite static
Description
Adds or deletes a static IP source binding entry.
show ip source binding
VLAN Interface
---- --------------------
10 FastEthernet6/10
VLAN Interface
---- --------------------
10 FastEthernet6/10
2-735