Macro Global Apply Cisco-Global - Cisco Catalyst 4500 Series Command Reference Manual

macro global apply cisco-global

macro global apply cisco-global
To apply the system-defined default template to the switch, use the macro global apply cisco-global
global configuration command on the switch stack or on a standalone switch.
Syntax Description
This command has no keywords or variables.
Defaults
This command has no default setting.
Command Modes
Global configuration mode
Command History Release
12.2(31)SG
Examples
These examples show how to apply the system-defined default to the switch:
Switch(config)# macro global apply cisco-global
Changing VTP domain name from gsg-vtp to [smartports] Device mode already VTP TRANSPARENT.
Switch(config)#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-426
macro global apply cisco-global
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-25342 -01