Debug Ipc - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

debug ipc

To debug the IPC activity, use the debug ipc command. To disable the debugging output, use the no form
of this command.
Syntax Description
all
errors
events
headers
packets
ports
seats
Defaults This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(12c)EW
Examples This example shows how to enable the debugging of the IPC events:
Switch# debug ipc events
Special Events debugging is on
Switch#
Related Commands Command
undebug ipc (same as no debug
ipc)
OL-25342 -01
debug ipc {all | errors | events | headers | packets | ports | seats}
no debug ipc {all | errors | events | headers | packets | ports | seats}
Enables all IPC debugging.
Enables the IPC error debugging.
Enables the IPC event debugging.
Enables the IPC header debugging.
Enables the IPC packet debugging.
Enables the debugging of the creation and deletion of ports.
Enables the debugging of the creation and deletion of nodes.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Disables debugging output.
debug ipc
2-151