Show Monitor Capture - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show monitor capture

To display the capture point details, so that you can see what capture points are defined, what their
attributes are, and whether they are active, use the show monitor capture command.
Syntax Description
name
parameter
buffer [brief |
detailed | dump]
Defaults If the capture point name is not provided, the command displays all the capture point details.
If the display mode is not specified, the command defaults to brief mode.
Command Modes Privileged EXEC mode
Command History Release
IOS XE 3.3.0SG/
15.1(1)SG
Usage Guidelines
When the command is issued with no parameters, it displays the details of all the capture points. When
specified with a capture point name and no other parameters, it displays the details of the specific capture
point name. With the parameter keyword, the command reconstructs the commands that describe the
capture point and displays them.
The buffer option displays the packets from the capture buffer. This option is applicable only if the
capture point directs the captured packets to the buffer. The packets can be decoded and displayed in
either the brief, detailed, or dump mode. The default mode is brief.
Examples
Following are example of how to use the show monitor capture command:
Switch# show monitor capture mycap buffer brief
0.000000
1.000000
2.000000
3.000000
4.000000
5.000000
6.000000
7.000000
8.000000
9.000000
10.000000
11.000000
OL-25342 -01
show monitor capture [name [parameter] | buffer [brief | detailed | dump]]
Specifies the capture point name.
Reconstructs and displays the exec commands for specifying the capture point.
Source the packets from the capture buffer, decode and display them in brief,
detailed or dump mode.
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
10.1.1.215 -> 20.1.1.2
10.1.1.216 -> 20.1.1.2
10.1.1.217 -> 20.1.1.2
10.1.1.218 -> 20.1.1.2
10.1.1.219 -> 20.1.1.2
10.1.1.220 -> 20.1.1.2
10.1.1.221 -> 20.1.1.2
10.1.1.222 -> 20.1.1.2
10.1.1.223 -> 20.1.1.2
10.1.1.224 -> 20.1.1.2
10.1.1.225 -> 20.1.1.2
10.1.1.226 -> 20.1.1.2
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
UDP Source port: 20001
show monitor capture
Destination port: 20002
Destination port: 20002
Destination port: 20002
Destination port: 20002
Destination port: 20002
Destination port: 20002
Destination port: 20002
Destination port: 20002
Destination port: 20002
Destination port: 20002
Destination port: 20002
Destination port: 20002
2-819