Snmp-Server Enable Traps - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

snmp-server enable traps

To enable SNMP notifications (traps or informs), use the snmp-server enable traps command. To
disable all SNMP notifications, use the no form of this command.
Syntax Description flash
insertion
removal
fru-ctrl
port-security
trap-rate trap-rate
stpx
vlancreate
vlandelete
vtp
mac-notification
change
move
threshold
Defaults
SNMP notifications are disabled.
Command Modes Global configuration mode
Command History Release
12.1(13)EW
12.2(31)SG
Usage Guidelines If you enter this command without an option, all notification types controlled by this command are
enabled.
OL-25342 -01
snmp-server enable traps [flash [insertion | removal] | fru-ctrl | port-security [trap-rate
trap-rate] | removal | stpx | vlancreate | vlandelete | vtp] [mac-notification [change | move |
threshold]
no snmp-server enable traps [flash [insertion | removal] | fru-ctrl | port-security [trap-rate
trap-rate] | removal | stpx | vlancreate | vlandelete | vtp] [mac-notification]
(Optional) Controls the SNMP FLASH trap notifications.
(Optional) Controls the SNMP flash insertion trap notifications.
(Optional) Controls the SNMP flash removal trap notifications.
(Optional) Controls the SNMP entity FRU control trap notifications.
(Optional) Controls the SNMP trap generation.
(Optional) Sets the number of traps per second.
(Optional) Controls all the traps defined in
CISCO-STP-EXTENSIONS-MIB notifications.
(Optional) Controls the SNMP VLAN created trap notifications.
(Optional) Controls the SNMP VLAN deleted trap notifications.
(Optional) Controls the SNMP VTP trap notifications.
(Optional) Controls the SNMP MAC trap notifications.
(Optional) Controls the SNMP MAC change trap notifications.
(Optional) Controls the SNMP MAC move trap notifications.
(Optional) Controls the SNMP MAC threshold trap notifications.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for MAC notification was added.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
snmp-server enable traps
2-927