Pppoe Intermediate-Agent Trust - Cisco Catalyst 4500 Series Command Reference Manual

pppoe intermediate-agent trust

pppoe intermediate-agent trust
To set the trust configuration of an interface, use the pppoe intermediate-agent trust global command.
To unset the trust parameter, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults All interfaces are untrusted.
Command Modes Interface configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
At least one trusted interface must be present on the switch for PPPoE Intermediate Agent feature to
work.
Set the interface connecting the switch to the PPPoE Server (or BRAS) as trusted.
Examples This example shows how to set an interface as trusted:
Switch(config-if)# pppoe intermediate-agent trust
This example shows how to disable the trust configuration for an interface:
Switch(config-if)# no pppoe intermediate-agent trust
Related Commands Command
pppoe intermediate-agent
vendor-tag strip
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-532
pppoe intermediate-agent trust
no pppoe intermediate-agent trust
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Enables vendor-tag stripping on PPPoE Discovery packets from a
PPPoE Server (or BRAS).
OL-25342 -01