Call-Home Test - Cisco Catalyst 4500 Series Command Reference Manual

call-home test

call-home test
To manually send a Call Home test message, use the call-home test command in privileged EXEC mode.
Syntax Description
"test-message"
profile profile-name
Command Default This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.2(52)SG
Usage Guidelines This command sends a test message to the specified destination profile. If you enter test message text,
you must enclose the text in quotes ("") if it contains spaces. If you do not enter a message, a default
message is sent.
Examples This example shows how to manually send a Call Home test message:
Switch# call-home test "test of the day" profile Ciscotac1
Related Commands
call-home (global
configuration)
call-home send
alert-group
service call-home (refer to
Cisco IOS documentation)
show call-home
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-86
call-home test ["test-message"] profile profile-name
(Optional) Test message text.
Specifies the name of the destination profile.
Modification
This command was introduced on Supervisor Engine 6E and the Catalyst
4900M.
Enters call home configuration mode.
Sends a specific alert group message.
Enables or disables Call Home.
Displays call-home configuration information.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-25342 -01