Debug Platform Packet Protocol Pagp - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

debug platform packet protocol pagp

To debug the PAgP protocol packets, use the debug platform packet protocol pagp command. To
disable the debugging output, use the no form of this command.
Syntax Description
receive
transmit
vlan
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(13)EW
Examples
This example shows how to enable all PM debugging:
Switch# debug platform packet protocol pagp
Switch#
Related Commands Command
undebug platform packet protocol
pagp (same as no debug platform packet
protocol pagp)
OL-25342 -01
debug platform packet protocol pagp [receive | transmit | vlan]
no debug platform packet protocol pagp [receive | transmit | vlan]
(Optional) Enables the platform packet reception debugging functions.
(Optional) Enables the platform packet transmission debugging functions.
(Optional) Enables the platform packet VLAN debugging functions.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Disables debugging output.
debug platform packet protocol pagp
2-161