Show Issu Rollback-Timer - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show issu rollback-timer

To display ISSU rollback-timer status, use the show issu rollback-timer command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes Priviledged EXEC mode
Command History Release
12.2(31)SGA
Examples
The following example shows how to display the rollback-timer status:
Switch#show issu rollback-timer
Switch#
Related Commands Command
issu acceptversion
issu runversion
OL-25342 -01
show issu rollback-timer
Modification
This command was introduced on the Catalyst 4500 series switch.
Rollback Process State = Not in progress
Configured Rollback Time = 45:00
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Halts the rollback timer and ensures that the new Cisco IOS
software image is not automatically stopped during the
ISSU process.
Forces a change from the active supervisor engine to the
standby supervisor engine and causes the newly active
supervisor engine to run the new image specified in the issu
loadversion command.
show issu rollback-timer
2-769