Cisco Catalyst 4500 Series Command Reference Manual page 603

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Examples This example shows how to create and configure a user-defined call-home profile:
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# destination transport-method http
Switch(cfg-call-home-profile)# destination address http
https://172.17.46.17/its/service/oddce/services/DDCEService
Switch(cfg-call-home-profile)# subscribe-to-alert-group configuration
Switch(cfg-call-home-profile)# subscribe-to-alert-group diagnostic severity normal
Switch(cfg-call-home-profile)# subscribe-to-alert-group environment severity notification
Switch(cfg-call-home-profile)# subscribe-to-alert-group syslog severity notification
pattern "UPDOWN"
Switch(cfg-call-home-profile)# subscribe-to-alert-group inventory periodic daily 21:12
Related Commands Command
destination address
destination message-size-limit bytes
destination preferred-msg-format
destination transport-method
subscribe-to-alert-group all
subscribe-to-alert-group configuration
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory
subscribe-to-alert-group syslog
OL-25342 -01
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Configures the destination e-mail address or URL to which
Call Home messages will be sent.
Configures a maximum destination message size for the
destination profile.
Configures a preferred message format.
Enables the message transport method.
Subscribes to all available alert groups.
Subscribes this destination profile to the Configuration
alert group.
Subscribes this destination profile to the Diagnostic alert
group.
Subscribes this destination profile to the Environment alert
group.
Subscribes this destination profile to the Inventory alert
group.
Subscribes this destination profile to the Syslog alert group.
profile
2-545