Destination Message-Size-Limit Bytes - Cisco Catalyst 4500 Series Command Reference Manual

destination message-size-limit bytes

destination message-size-limit bytes
To configure a maximum destination message size for the destination profile, use the destination
message-size-limit bytes command.
Syntax Description
This command has no arguments or keywords.
Defaults
3145728 bytes
Command Modes
cfg-call-home-profile
Command History Release
12.2(52)SG
Usage Guidelines
To enter profile call-home configuration submode, use the profile command in call-home configuration
mode.
Examples
This example shows how to configure the maximum message size for the destination profile as 3000000:
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# destination message-size-limit 3000000
Switch(cfg-call-home-profile)#
Related Commands Command
destination address
destination preferred-msg-format
destination transport-method
profile
subscribe-to-alert-group all
subscribe-to-alert-group configuration
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-188
destination message-size-limit bytes
Modification
Support was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Configures the destination e-mail address or URL to which
Call Home messages will be sent.
Configures a preferred message format.
Enables the message transport method.
Enters profile call-home configuration submode
Subscribes to all available alert groups.
Subscribes this destination profile to the Configuration
alert group.
Subscribes this destination profile to the Diagnostic alert
group.
Subscribes this destination profile to the Environment alert
group.
OL-25342 -01