Pagp Learn-Method - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

pagp learn-method

To learn the input interface of the incoming packets, use the pagp learn-method command. To return to
the default value, use the no form of this command.
Syntax Description
aggregation-port
physical-port
Defaults
Aggregation port is enabled.
Command Modes
Interface configuration mode
Command History Release
12.1(8a)EW
Examples
This example shows how to enable physical port address learning within the bundle:
Switch(config-if)# pagp learn-method physical-port
Switch(config-if)#
This example shows how to enable aggregation port address learning within the bundle:
Switch(config-if)# pagp learn-method aggregation-port
Switch(config-if)#
Related Commands Command
show pagp
OL-25342 -01
pagp learn-method {aggregation-port | physical-port}
no pagp learn-method
Specifies learning the address on the port channel.
Specifies learning the address on the physical port within the bundle.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Displays information about the port channel.
pagp learn-method
2-481