Cisco Catalyst 4500 Series Command Reference Manual page 899

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
!
interface FastEthernet 6/1
service-policy input p1
Switch# show policy-map p1
Policy Map p1
Switch# show policy-map interface
FastEthernet6/1
Service-policy input: p1
destination-port
Switch#
Related Commands Command
class-map
policy-map
show class-map
show qos
OL-25342 -01
police 1000000 bps 9000 byte conform-action transmit exceed-action drop
Class c1
police 1000000 bps 9000 byte conform-action transmit exceed-action drop
Class-map: c1 (match-all)
15432182 packets
Match: flow ip source-address ip destination-address ip protocol l4 source-port l4
police: Per-interface
Conform: 64995654 bytes Exceed: 2376965424 bytes
Class-map: class-default (match-any)
0 packets
Match: any
0 packets
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Creates a class map to be used for matching packets to the
class whose name you specify and to be used enter
class-map configuration mode.
Creates a policy map that can be attached to multiple ports
to specify a service policy and to enter policy-map
configuration mode.
Displays class map information.
Displays QoS information.
show policy-map interface
2-841