Show Access-Group Mode Interface - Cisco Catalyst 4500 Series Command Reference Manual

2 2
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show access-group mode interface

To display the ACL configuration on a Layer 2 interface, use the show access-group mode interface
command.
Syntax Description
interface
interface-number
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(19)EW
12.2(25)EW
Usage Guidelines
The valid values for the port number depend on the chassis used.
Examples This example shows how to display the ACL configuration on the Fast Ethernet interface 6/1:
Switch# show access-group mode interface fa6/1
Interface FastEthernet6/1:
Access group mode is: merge
Switch#
Related Commands Command
access-group mode
OL-25342 -01
show access-group mode interface [interface interface-number]
(Optional) Interface type; valid values are ethernet, fastethernet,
gigabitethernet, tengigabitethernet, and port-channel.
(Optional) Interface number.
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Support for the 10-Gigabit Ethernet interface was introduced on the
Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Specifies the override modes (for example, VACL overrides
PACL) and the non-override modes (for example, merge or strict
mode).
show access-group mode interface
2-609