Debug Nvram - Cisco Catalyst 4500 Series Command Reference Manual

debug nvram

debug nvram
To debug the NVRAM activity, use the debug nvram command. To disable the debugging output, use
the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples This example shows how to debug NVRAM:
Switch# debug nvram
NVRAM behavior debugging is on
Switch#
Related Commands Command
undebug nvram (same as no debug
nvram)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-158
debug nvram
no debug nvram
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Disables debugging output.
OL-25342 -01