Debug Ip Dhcp Snooping Packet - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

debug ip dhcp snooping packet

To debug the DHCP snooping messages, use the debug ip dhcp snooping packet command. To disable
the debugging output, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging of snooping packet is disabled.
Command Modes Privileged EXEC mode
Command History Release
12.1(12c)EW
Examples This example shows how to enable the debugging for the DHCP snooping packets:
Switch# debug ip dhcp snooping packet
Switch#
This example shows how to disable the debugging for the DHCP snooping packets:
Switch# no debug ip dhcp snooping packet
Switch#
Related Commands Command
debug ip dhcp snooping event
OL-25342 -01
debug ip dhcp snooping packet
no debug ip dhcp snooping packet
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Debugs the DHCP snooping events.
debug ip dhcp snooping packet
2-153