Apply - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

apply

To implement a new VLAN database, increment the configuration number, save the configuration
number in NVRAM, and propagate the configuration number throughout the administrative domain, use
the apply command.
Syntax Description This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
VLAN configuration mode
Command History Release
12.1(8a)EW
Usage Guidelines
The apply command implements the configuration changes that you made after you entered VLAN
database mode and uses them for the running configuration. This command keeps you in VLAN database
mode.
You cannot use this command when the switch is in the VTP client mode.
You can verify that the VLAN database changes occurred by entering the show vlan command from
privileged EXEC mode.
Examples
This example shows how to implement the proposed new VLAN database and to recognize it as the
current database:
Switch(config-vlan)# apply
Switch(config-vlan)#
Related Commands Command
exit (refer to Cisco IOS
documentation)
reset
show vlan
OL-25342 -01
apply
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Closes an active terminal session by logging off the switch.
Leaves the proposed new VLAN database but remains in VLAN
configuration mode and resets the proposed new database to be
identical to the VLAN database currently implemented.
Displays VLAN information.
apply
2-19