Energywise (Interface Configuration) - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

energywise (interface configuration)

Use the energywise interface configuration command to configure EnergyWise on the power over
Ethernet (PoE) port. Use the no form of this command to disable EnergyWise on the port and remove
the EnergyWise configuration.
Syntax Description
importance importance (Optional) Sets the importance of the port.
keywords word,word,... (Optional) Assigns at least one keyword for the port.
level level
recurrence
importance importance
at minute hour
day_of_month month
day_of_week
OL-25342 -01
energywise [importance importance | keywords word,word,... | level level [recurrence at minute
hour day_of_month month day_of_week] | name name | role role]
no energywise
The range is from 1 to 100.
When assigning multiple keywords, separate the keywords with commas,
and do not use spaces between keywords.
For the word value:
•
•
(Optional) Sets the power level of the port.
The only valid values are 0 and 10.
(Optional) Schedules the power-on or power-off recurrence.
•
•
•
•
•
•
Note
Note
Note
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
You can enter alphanumeric characters and symbols such as #, (, %, ! or
&.
Do not use an asterisk (*) or a blank space between the characters and
symbols.
importance importance—Sets the importance of the port in the domain.
The range is from 1 to 100.
minute—The range is from 0 to 59. Use * for the wildcard.
hour—The range is from 0 to 23. Use * for the wildcard.
day_of_month—The range is from 1 to 31. Use * for the wildcard.
month—The range is from 1 to 12. You can also enter jan, feb, mar, apr,
and so on. Use * for the wildcard.
day_of_week—The range is from 0 to 7 (0 and 7 both represent Sunday).
Use * for the wildcard.
The specified times are local times based on the PoE-entity time
zone.
If the day of the month and day of the week are both specified, (that
is, are not woldcards), the recurrence is executed when either field
matches the current time.
Recurrence takes effect within the minute specified, rather than
exactly on the minute; it could occur as much as 60 seconds late.
energywise (interface configuration)
2-227