Redundancy Reload - Cisco Catalyst 4500 Series Command Reference Manual

redundancy reload

redundancy reload
To force a reload of one or both supervisor engines, use the redundancy reload command.
Syntax Description
peer
shelf
Defaults This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(12c)EW
Usage Guidelines Before using this command, refer to the "Performing a Software Upgrade" section of the Catalyst 4500
Series Switch Cisco IOS Software Configuration Guide for additional information.
The redundancy reload shelf command conducts a reboot of both supervisor engines. The modules are
reset.
Examples This example shows how to manually reload one or both supervisor engines:
Switch# redundancy reload shelf
Switch#
Related Commands Command
redundancy
show redundancy
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-558
redundancy reload {peer | shelf}
Reloads the peer unit.
Reboots both supervisor engines.
Modification
Support for this command was introduced on the Catalyst 4500 series switch
(Catalyst 4507R only).
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Enters the redundancy configuration mode.
Displays redundancy facility information.
OL-25342 -01