Reset - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

reset

To leave the proposed new VLAN database but remain in VLAN configuration mode and reset the
proposed new database to be identical to the VLAN database currently implemented, use the reset
command.
Syntax Description This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
VLAN configuration mode
Command History Release
12.1(8a)EW
Examples
This example shows how to reset the proposed new VLAN database to the current VLAN database:
Switch(vlan-config)# reset
RESET completed.
Switch(vlan-config)#
OL-25342 -01
reset
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
reset
2-577