Show Qos Maps - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show qos maps

To display QoS map information, use the show qos maps command.
Syntax Description
cos
dscp
policed
tx-queue
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
Usage Guidelines
This command is not supported on the Supervisor Engine 6-E and Catalyst 4900M chassis.
Examples
This example shows how to display QoS map settings:
Switch# show qos maps
DSCP-TxQueue Mapping Table (dscp = d1d2)
d1 :d2
-------------------------------------
0 :
1 :
2 :
3 :
4 :
5 :
6 :
Policed DSCP Mapping Table (dscp = d1d2)
d1 :d2
-------------------------------------
0 :
1 :
2 :
3 :
4 :
5 :
6 :
OL-25342 -01
show qos maps [cos | dscp [policed | tx-queue]]
(Optional) Displays CoS map information.
(Optional) Displays DSCP map information.
(Optional) Displays policed map information.
(Optional) Displays tx-queue map information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
0 1 2 3 4 5 6
01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 02 02 02 02
02 02 02 02 02 02 02 02 02 02
02 02 03 03 03 03 03 03 03 03
03 03 03 03 03 03 03 03 04 04
04 04 04 04 04 04 04 04 04 04
04 04 04 04
0 1 2 3 4 5 6
00 01 02 03 04 05 06 07 08 09
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
7 8 9
7 8 9
show qos maps
2-867