Pppoe Intermediate-Agent (Global) - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

pppoe intermediate-agent (global)

To enable the PPPoE Intermediate Agent feature on a switch, use the pppoe intermediate-agent global
configuration command. To disable the feature, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults disabled
Command Modes Global configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
You must enable PPPoE Intermediate Agent globally on a switch before you can use
PPPoE Intermediate Agent on an interface or interface VLAN.
Examples
This example shows how to enable PPPoE Intermediate Agent on a switch:
Switch(config)# pppoe intermediate-agent
This example shows how to disable PPPoE Intermediate Agent on a switch:
Switch(config)# no pppoe intermediate-agent
Related Commands Command
pppoe intermediate-agent
(global)
OL-25342 -01
pppoe intermediate-agent
no pppoe intermediate-agent
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Sets the access node identifier, generic error message, and
identifier string for a switch.
pppoe intermediate-agent (global)
2-523