Remote-Span - Cisco Catalyst 4500 Series Command Reference Manual

remote-span

remote-span
To convert a VLAN into an RSPAN VLAN, use the remote-span command. To convert an RSPAN
VLAN to a VLAN, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults RSPAN is disabled.
Command Modes VLAN configuration mode
Command History Release
12.1(20)EW
Examples This example shows how to convert a VLAN into an RSPAN VLAN:
Switch# config terminal
Switch(config)# vlan 20
Switch(config-vlan)# remote-span
Switch(config-vlan)# end
Switch#
Related Commands Command
monitor session
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-560
remote-span
no remote-span
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Enables the SPAN sessions on interfaces or VLANs.
OL-25342 -01