Cisco Catalyst 4500 Series Command Reference Manual page 121

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Switch(config-if)# do sh running interface gigabitethernet1/1
interface interface-id
auto qos video cts
qos trust device cts
service-policy input AutoQos-4.0-Input-Policy
service-policy output AutoQos-4.0-Output-Policy
end
This example shows how to generate QoS configuration for the cisco-camera interface
gigabitethernet1/1:
Switch(config)# interface gigabitethernet1/1
Switch(config-if)# auto qos video ip-camera
Switch(config-if)# do sh running interface interface-id
interface interface-id
auto qos video ip-camera
qos trust device ip-camera
service-policy input AutoQos-4.0-Input-Policy
service-policy output AutoQos-4.0-Output-Policy
end
Related Commands Command
auto qos trust
auto qos srnd4
OL-25342 -01
Description
Generates QoS configurations for trusted interfaces.
Generates QoS configurations based on solution reference
network design 4.0.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
auto qos video
2-63