Clear Ip Arp Inspection Statistics - Cisco Catalyst 4500 Series Command Reference Manual

clear ip arp inspection statistics

clear ip arp inspection statistics
To clear the dynamic ARP inspection statistics, use the clear ip arp inspection statistics command.
Syntax Description
vlan vlan-range
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(19)EW
Examples This example shows how to clear the DAI statistics from VLAN 1 and how to verify the removal:
Switch# clear ip arp inspection statistics vlan 1
Switch# show ip arp inspection statistics vlan 1
Vlan
----
Vlan
----
Vlan
----
Switch#
Related Commands Command
arp access-list
clear ip arp inspection log
show ip arp inspection log
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-106
clear ip arp inspection statistics [vlan vlan-range]
(Optional) Specifies the VLAN range.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Forwarded
---------
1 0
DHCP Permits ACL Permits
------------ -----------
1 0
Dest MAC Failures
-----------------
1 0
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Dropped DHCP Drops
------- ----------
0 0
Source MAC Failures
-------------------
0
IP Validation Failures
----------------------
0
Description
Defines an ARP access list or adds clauses at the end of a
predefined list.
Clears the status of the log buffer.
Displays the status of the log buffer.
ACL Drops
----------
0
0
OL-25342 -01