Show Ip Igmp Snooping Vlan - Cisco Catalyst 4500 Series Command Reference Manual

show ip igmp snooping vlan

show ip igmp snooping vlan
To display information on the dynamically learned and manually configured VLAN switch interfaces,
use the show ip igmp snooping vlan command.
Syntax Description
vlan_num
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(12c)EW
Usage Guidelines You can also use the
address table for a VLAN that has IGMP snooping enabled.
Examples This example shows how to display snooping information for a specific VLAN:
Switch# show ip igmp snooping vlan 2
vlan 2
----------
IGMP snooping is globally enabled
IGMP snooping TCN solicit query is globally enabled
IGMP snooping global TCN flood query count is 2
IGMP snooping is enabled on this Vlan
IGMP snooping immediate-leave is disabled on this Vlan
IGMP snooping mrouter learn mode is pim-dvmrp on this Vlan
IGMP snooping is running in IGMP_ONLY mode on this Vlan
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-722
show ip igmp snooping vlan vlan_num
Number of the VLAN; valid values are from 1 to 1001 and from 1006 to 4094.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for extended addressing was added.
show mac-address-table multicast
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
command to display the entries in the MAC
OL-25342 -01