Cisco Catalyst 4500 Series Command Reference Manual page 67

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
access-list hardware capture mode
This example shows another way to configure the switch to capture control packets globally across all
VLANs:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# no access-list hardware capture mode vlan
Switch(config)# end
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-9
OL-25342 -01