Cisco Catalyst 4500 Series Command Reference Manual page 400

ip wccp check services all
The ip wccp check services all command is a global WCCP command that applies to all services and is
Note
not associated with a single service.
Examples
The following example shows how to configure all WCCP services:
Router(config)# ip wccp check services all
Related Commands Command
ip wccp
ip wccp group-listen
ip wccp redirect
ip wccp redirect exclude
in
ip wccp version
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-342
Chapter 2
Description
Enables support of the specified WCCP service for participation in a service
group.
Configures an interface on a router to enable or disable the reception of IP
multicast packets for Web Cache Communication Protocol (WCCP).
Enables packet redirection on an inbound or outbound interface using Web
Cache Communication Protocol (WCCP).
Configure an interface to exclude packets received on an interface from
being checked for redirection.
Specifies which version of WCCP you wish to use on your router.
Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-25342 -01