Show Vlan Mapping - Cisco Catalyst 4500 Series Command Reference Manual

show vlan mapping

show vlan mapping
Use the show vlan mapping privileged EXEC command to display information about VLAN mapping
on trunk ports.
Syntax Description
interface interface-id
| begin
| exclude
| include
expression
Defaults
None
Command Modes
Privileged EXEC
Command History Release
12.2(54)SG
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples
This is a sample output from the show vlan mapping command:
Switch# show vlan mapping
Interface Fa0/5:
VLANs on wire
------------------
default QinQ
Interface Fa0/2:
VLANs on wire
------------------
2
This is a sample output from the show vlan mapping command for an interface:
Switch# show vlan mapping interface fa0/6
Interface fa0/6:
VLAN on wire
1
12,16-18
*
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-912
show vlan mapping [interface interface-id] [ | {begin | exclude | include} expression]
Modification
This command was introduced on the Catalyst 4500 series switch.
Translated VLAN
---------------
Translated VLAN
---------------
104
Translated VLAN
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
(Optional) Displays VLAN mapping information for the specified
interface.
(Optional) Displays begins with the line that matches the expression.
(Optional) Displays excludes lines that match the expression.
(Optional) Displays includes lines that match the specified expression.
Specifies an expression in the output to use as a reference point.
Operation
--------------
1 selective QinQ
Operation
--------------
1-to-1 mapping
Operation
11 1-to-1 mapping
100 selective QinQ
101 default QinQ
OL-25342 -01