Dot1X Initialize - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

dot1x initialize

To unauthorize an interface before reinitializing 802.1X, use the dot1x initialize command.
Syntax Description
interface
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(12c)EW
Usage Guidelines Use this command to initialize state machines and to set up the environment for fresh authentication.
Examples This example shows how to initialize the 802.1X state machines on an interface:
Switch# dot1x initialize
Switch#
Related Commands Command
show dot1x
OL-25342 -01
dot1x initialize interface
Number of the interface.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Displays dot1x information.
dot1x initialize
2-209