Cisco Catalyst 4500 Series Command Reference Manual page 309

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
This example shows how to set receive flow control to desired:
Switch(config-if)# flowcontrol receive desired
Switch(config-if)#
Related Commands Command
interface port-channel
interface range
show flowcontrol
show running-config
speed
OL-25342 -01
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Accesses or creates a port-channel interface.
Runs a command on multiple ports at the same time.
Displays the per-interface status and statistics related to
flow control.
Displays the running-configuration for a switch.
Configures the interface speed.
flowcontrol
2-251