Show Mac-Address-Table Protocol - Cisco Catalyst 4500 Series Command Reference Manual

show mac-address-table protocol

show mac-address-table protocol
To display the MAC address table information that is based on the protocol, use the show
mac-address-table protocol command.
Syntax Description
assigned
ip
ipx
other
Defaults
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(8a)EW
Usage Guidelines
For the MAC address table entries that are used by the routed ports, the routed port name is displayed in
the "vlan" column not the the internal VLAN number.
Examples
This example shows how to display the MAC address table entries that have a specific protocol type (in
this case, assigned):
Switch# show mac-address-table protocol assigned
vlan
-----+---------------+--------+---------+---+--------------------------------
200
100
5
4092
1
4
4092
4092
1
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-798
show mac-address-table protocol {assigned | ip | ipx | other}
Specifies the assigned protocol entries.
Specifies the IP protocol entries.
Specifies the IPX protocol entries.
Specifies the other protocol entries.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
mac address type
0050.3e8d.6400 static
0050.3e8d.6400 static
0050.3e8d.6400 static
0000.0000.0000 dynamic
0050.3e8d.6400 static
0050.3e8d.6400 static
0050.f0ac.3058 static
0050.f0ac.3059 dynamic
0010.7b3b.0978 dynamic
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
protocol qos
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Fa5/9
ports
OL-25342 -01