Cisco Catalyst 4500 Series Command Reference Manual page 658

set precedence
Related Commands Command
match (class-map
configuration)
policy-map
service-policy (policy-map
class)
set cos
set dscp
set qos-group
set precedence
show policy-map
show policy-map interface
table-map (value mapping)
(refer to Cisco IOS
documentation)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-600
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Defines the match criteria for a class map.
Creates or modifies a policy map that can be attached to multiple
ports to specify a service policy and to enter policy-map
configuration mode.
Creates a service policy that is a quality of service (QoS) policy
within a policy map.
Sets IP traffic by setting a class of service (CoS).
Marks a packet by setting the differentiated services code
point (DSCP) value in the type of service (ToS) byte.
Sets a quality of service (QoS) group identifier (ID) that can be
used later to classify packets.
Sets the precedence value in the packet header.
Displays information about the policy map.
Displays the statistics and configurations of the input and output
policies that are attached to an interface.
Modifies metric and tag values when the IP routing table is
updated with BGP learned routes.
OL-25342 -01