Show Interfaces Private-Vlan Mapping - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show interfaces private-vlan mapping

To display PVLAN mapping information for VLAN SVIs, use the show interfaces private-vlan
mapping command.
Syntax Description
active
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Usage Guidelines
This command displays SVI information only.
Examples This example shows how to display PVLAN mapping information:
Switch# show interfaces private-vlan mapping
Interface Secondary VLAN Type
--------- -------------- -----------------
vlan2
vlan2
Switch#
Related Commands Command
private-vlan
private-vlan mapping
OL-25342 -01
show interfaces private-vlan mapping [active]
(Optional) Displays active interfaces only.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
301 isolated
302 isolated
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Configures private VLANs and the association between a
private VLAN and a secondary VLAN.
Creates a mapping between the primary and the secondary
VLANs so that both share the same primary VLAN SVI.
show interfaces private-vlan mapping
2-687